Hey everyone,
Ordered a bunch of stuff and most of it finally came in, so I have started the plumbing and automation makeover.
I did learn that although it seems like you can buy the 5 relay intellicenter and upgrade to an 8 or 10 later, no one seems to know what the part numbers for the individual parts are, even pentair. So I opted for the 8 to start with options.
I am in the process of wiring up the load center and all the feeds to the various equipment. I am hoping a few people can provide some advice.
First of all. My old system had the pump, booster, and heater all connected to the same double 20 breakers thru a time clock. Anyone think or know if i should get separate breakers for the pumps and heater now? Also the intellicenter has a relay for the filter pump but since i have an intelliflo i believe I wire the pump up to the breaker directly and only connect the pump via the com cable. Has anyone else done this to verify?
I am also laying out my plumbing. This is my proposed setup. Intake valve, pump, filter, heater, check vavle, booster, swcg, return. Does that sound correct?
Thanks everyone!