New Pool - Valve Settings

[Jimrahbe]

Erik,

You should, but based on his previous work, I'd want to know how he plans to fix the current issue.

Thanks,

Jim R.

 

[Erik13]

Erik,

You should, but based on his previous work, I'd want to know how he plans to fix the current issue.

Thanks,

Jim R.

Ha! Definitely confirmed the fix followed the picture you guys sent over with the main drain and skimmer on the same actuator. I really appreciate all the help - it was invaluable on my end!

 

[Ahultin]

Also, is there a way to add another actuator for the skimmer/cleaner diverter valve to a RS4

Looks like there is a setting in the rs4 to control a cleaner actuator. I beleive @ajw22 is the jandy automation guru so he may be able to walk you thru that.

 

[ajw22]

You have an RS4 system that limits your flexibility with three AUX buttons.

What is connected to AUX 1, 2, & 3?

Jandy Aqualink RS - Further Reading

www.troublefreepool.com

 

[Erik13]

You have an RS4 system that limits your flexibility with three AUX buttons.

What is connected to AUX 1, 2, & 3?

Jandy Aqualink RS - Further Reading

www.troublefreepool.com

Just hopped into the web end of the system and here’s how the AUX are labeled thus far.

 

[ajw22]

Move your AUX1 air blower relay to AUX3 socket to free up AUX1.

Plug the cleaner JVA into the CLEANER JVA socket.

Turn DIP Switch 1 ON.

AUX1 will be labeled CLEANER and control the cleaner JVA.

Blower will now be AUX3.

 

[Erik13]

Move your AUX1 air blower relay to AUX3 socket to free up AUX1.

Plug the cleaner JVA into the CLEANER JVA socket.

Turn DIP Swicth 1 ON.

AUX1 will be labeled CLEANER and control the cleaner JVA.

Blower will now be AUX3.

This is fantastic - I’ll get my hands on an additional JVA and get this done! Thank you for the incredibly precise help.