After 10 months of research and 7 different builders, we finally have one and have started. Very excited. I've been lurking for a while and take care of another pool using the TFP method. I will have the TF-100 on order soon!
New build Gilbert AZ
- Thread starter MG386
- Start date
Very nice looking start! I particularly like the stair design.
Exciting days ahead! Keep up the pics!! We loveeeeee pics!
Maddie
Exciting days ahead! Keep up the pics!! We loveeeeee pics!
Maddie
Starting to look like a pool! Time to start watering and bonding with my Shotcrete ?
Nice! Love the wall and feature area at the deep end. Have you picked out your tile, plaster, and decking?
We have but I can't find pics. Tile is some type of blue my wife picked out, noche travertine, and a nice greyish blue pebble Sheen. Kids are excited to jump off the fountain. ?
Wow, MG! It looks incredible! Everything seems to be planned perfectly. Obviously your 10 months of research paid off. Can't wait to see the final product.
Yes, we will have turf between the square pads, and a larger area next to the pool. Plan is to have water in by end of the month, hope to have a little party on the 4th of July, fingers crossed.
Getting exciting!
Thanks.
Fill water tested with TF-100.
FC 1.5
CC 0
PH 7.8
TA 210
CH 250
CYA 0
Salt 600
Is it normal to have so much FC in fill water?
Getting exciting!
Thanks.
Fill water tested with TF-100.
FC 1.5
CC 0
PH 7.8
TA 210
CH 250
CYA 0
Salt 600
Is it normal to have so much FC in fill water?
- May 3, 2014
- 62,774
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Go to your water supplier website. They must by law do water quality tests. Technically I think they have to mail them to you each year. It will give what they think is in the water.
Water treatment does use chlorine to sanitize. I must admit, 1.5 FC is pretty high to test at from the tap ---- would be kind of harsh without stabilizer in it.
Take care.
Water treatment does use chlorine to sanitize. I must admit, 1.5 FC is pretty high to test at from the tap ---- would be kind of harsh without stabilizer in it.
Take care.
I am loving everything I see in this build thread-PO that reads and learns, NICE looking pool, Awesome area about the pool, kids and a cute dog loving live! THANKS!
I want to ask how in the world are you going to work on the filter when needed? Maybe it is not as tight as it looks in the picture. You also need to make sure there are unions so you can maintain, work on, replace the equipment.
Kim
I want to ask how in the world are you going to work on the filter when needed? Maybe it is not as tight as it looks in the picture. You also need to make sure there are unions so you can maintain, work on, replace the equipment.
Kim
I love your pool design!!! The travertine is gorgeous! I have noche for my deck, too, and love it.
The FC in my tap water runs between 1.5 and 2.5. Four days ago, many in my neighborhood, including me, smelled a strong chlorine odor. So I tested it, and the FC was 4ppm.
We NEED those pictures of your tile! I see a perfect place for Kim's bling - trimming those lovely steps. We'll be happy to help you pick out something sparkly to go with your tile and plaster!!
The FC in my tap water runs between 1.5 and 2.5. Four days ago, many in my neighborhood, including me, smelled a strong chlorine odor. So I tested it, and the FC was 4ppm.
We NEED those pictures of your tile! I see a perfect place for Kim's bling - trimming those lovely steps. We'll be happy to help you pick out something sparkly to go with your tile and plaster!!
Thanks for the comments, I am concerned about the proximity of the filter housing. It will be a challenge to pull the drain plug and open to clean filters being so close to the wall and behind the pump ?. Tile starts tomorrow I hope, so more pictures soon.
1.65 ppm was the city limits for FC, so I guess we are within limits, just seemed high. We have a whole house filter/softener so we never feel/smell it in the shower, but I will be using untreated water for pool fill.
1.65 ppm was the city limits for FC, so I guess we are within limits, just seemed high. We have a whole house filter/softener so we never feel/smell it in the shower, but I will be using untreated water for pool fill.
Similar threads
