OEM is over $100. Are there any suitable aftermarket igniters available? I found an OEM on amindemoa.com for $35 but I suspects it's fishy. Thanks.
My Jandy LT400-L Pool Heater Igniter R0386900 Failed
- Thread starter johnasmith
- Start date
swamprat69
Well-known member
The most important thing is will your existing metal mounting clip fit. This part "might" work. IGN-001 - DiversiTech IGN-001 - TrueStart Hot Surface Igniter, Universal, Silicon Carbide
Thank you, that looks promising. I will pull the old one tomorrow and see exactly how it mounts.
swamprat69 That looks like the exact same igniter. Shorter wires but I should be able to use ceramic wire nuts to connect to the originals. Any idea where I can get the fiberglass gasket material for the burner assembly?
Attachments
swamprat69
Well-known member
I have always had the gaskets supplied with the ignitors, but you might try this company and ask them about the best one for the application (cut to size). McMaster-Carr
swamprat69
Well-known member
Looks like they are an Industrial supply, but you might be able to track down a material that you can use.
