Hi! I’m fairly new to pool ownership but I bought my Intex Ultra XTR 18X52 last summer and everything was great. Opened the pool last week and still everything great. However, yesterday I came outside and filter pump will not turn on. No display lights or anything. I have checked the outlets and they are fine. No flipped breakers. Did reset, test, reset and all I get is a very faint beep and that’s it. Other than that, nothing. I’m lost on what could be wrong and what to do next. Any help would be greatly appreciated. Thanks so much in advance.
Intex SF80110-2 Pump won’t start
- Thread starter THtweety
- Start date
- Jul 21, 2013
- 52,852
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
That is typical Intex pump button control failure we have heard about. Some folks have figured out how to bypass the button and hack alternative controls for the pump.
www.troublefreepool.com
www.troublefreepool.com
That is typical Intex pump button control failure we have heard about. Some folks have figured out how to bypass the button and hack alternative controls for the pump.
Intex 16" Sand Filter Pump (Model SF60110-2) - Bypassing the digital timer and integrating into the smart home.
Problem: I got the Intex 16" Sand Filter Pump (Model SF60110-2) to replace the small Intex Cartridge pump that came with our 18' above ground pool. The outgoing pump's schedule was controlled by a zWave outdoor smart plug and life was good. Well... the new sand filter pump is equipped with a...
www.troublefreepool.com
Intex Pools - Further Reading
www.troublefreepool.com
Thanks for offering advice. I went and bought a new plug and replaced it and it’s working great again. A simple fix thankfully. 