Recently had my equipment replaced and added the Intellicenter 2 with Intellivalves for a Pool/Spa set-up with Pool/Spa Mode and 2 Features Spillway/Air Blower.
Installer is very non-responsive and while everything “works” the return valve is programmed backwards: Pool mode activates the Intake from the pool but returns to the spa, Spa Mode activates Intake from Spa and return to pool (will drain spa) and Spillway activates Intake from Pool and Return to Pool.
Does anyone have any good resources how I can reverse this? I found some YouTube videos but they seem to focus on the IntelliValve programming which seems to be fine (setting 0/24) the issue is which body is 0 vs 24 on the return only as the intake is set properly.
Thanks
Installer is very non-responsive and while everything “works” the return valve is programmed backwards: Pool mode activates the Intake from the pool but returns to the spa, Spa Mode activates Intake from Spa and return to pool (will drain spa) and Spillway activates Intake from Pool and Return to Pool.
Does anyone have any good resources how I can reverse this? I found some YouTube videos but they seem to focus on the IntelliValve programming which seems to be fine (setting 0/24) the issue is which body is 0 vs 24 on the return only as the intake is set properly.
Thanks