Intelliph thinks it's in spa mode

Jump to latest Follow Reply
T

Teeguy

Member
Jul 8, 2022
9
San Diego
Pool Size
25000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
Just installed a Pentair Intelliph system with my Easytouch and IC40 SWG. Pool automation is working fine but when I powered up the Intelliph system for the first time, it said no dispensing due to spa mode. I switched the system to spa and it started dispensing so somehow intelliph sees my system settings backwards. Any ideas?

Thank you.
 
Think I just figured it out. IC40 was set to 0%, which I think Itelliph keys off of to shut down in spa mode. Raised the IC40 output and the Intelliph started dispensing normally.
 
Teeguy said:
Think I just figured it out. IC40 was set to 0%, which I think Itelliph keys off of to shut down in spa mode. Raised the IC40 output and the Intelliph started dispensing normally.
Click to expand...
Glad you figured it out. Yes, anything less than 5% on the IC40 and the IpH thinks it is in spa mode.

--Jeff
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply