My pentair intellichlor seems to be stuck at 100% input. My chlorine is a little high and went to turn it down but all the output LEDs stay solid when I try adjust it.
Any ideas?
Any ideas?
Intellichlor won't turn down
- Thread starter Elements
- Start date
- Jul 21, 2013
- 52,891
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Your profile says you have 3 Intellichlor SWGs. Are they master/slave types? Are you trying to adjust the master unit?
Yes one master two slaves. Master won't turn down. Pressing the less/more button doesn't do anything. Still reading 100% output
The commercial units are designed for ORP control.
The cell are set to 100% and are turned on and off by the ORP sensor.
I don't know if you can use them in a percentage setting.
You might want to contact Pentair to inquire.
The cell are set to 100% and are turned on and off by the ORP sensor.
I don't know if you can use them in a percentage setting.
You might want to contact Pentair to inquire.
Similar threads
