IntelliCenter - Grey Screen

[Jimrahbe]

r. @MyAZPool

Thanks.. The op only sees pool temps on his phone.. even though he has a spa. On my EasyTouch, you can select what you want to display.. Both the Pool and Spa or just the Pool or the Spa.. Does the IntelliCenter allow you to do the same thing?? Either the op has a pool only unit or the spa is just not set up to be displayed.

Know of any quick way to look on the system to see if it is an i8P or i8PS???

Thanks,

Jim R.

 

[MyAZPool]

Oh, okay, he has a spa. Got it.
He should see a pool temp when "Pool" is the body selected and should only see spa temp when Spa is the selected body. Otherwise, he should see last spa temp like this.


If I turn off the Pool body and turn on the Spa body, then it should look like this.

 

[Jimrahbe]

r.

The Op only see "Pool", there is no display for "Spa".

Jim R.

 

[MyAZPool]

Jim,
Unless the op can get into his webclient, the easiest way to tell is to have him post a picture here of the mother and daughter cards located in the flip down panel in the low voltage compartment. That will be an immediate indication to us (and simplest). Then we'll know for sure if its an i8P or PS.

Like this...


EDIT: If he doesn't want to open the low voltage compartment and can get into his web client, then he can navigate to settings (hamburger icon), then click about and it will give him a screen like this. If it's a PS model it should say "SHARED BODY" next to panel configuration like this.