Can’t seem to get my water as clear as normal. Only with high levels of chlorine does it get clear. It’s not very cloudy now but like 1 step below where it should be. Maybe a slight murky.
Pump runs 8 hours a day at 80% ( summer months) I have been maintaining my chemistry myself for years.
While looking at my diagnosis section on my aqua logic one day I did notice that my tcell was shut down prematurely reading all zeros on the display. 80% of 8 hours = 6 hours it should be on and generating. It read all zeros 4 hours into the 8 hours programmed.
Anyone heard of these boards malfunctioning on the timer?
Current levels are: FC 5, CC 5.5, TA 80, cya 70,CH 260, salt 2800
correct me if I’m wrong but tcell’s either work or don’t work. No intermitting between the 2?
Pump runs 8 hours a day at 80% ( summer months) I have been maintaining my chemistry myself for years.
While looking at my diagnosis section on my aqua logic one day I did notice that my tcell was shut down prematurely reading all zeros on the display. 80% of 8 hours = 6 hours it should be on and generating. It read all zeros 4 hours into the 8 hours programmed.
Anyone heard of these boards malfunctioning on the timer?
Current levels are: FC 5, CC 5.5, TA 80, cya 70,CH 260, salt 2800
correct me if I’m wrong but tcell’s either work or don’t work. No intermitting between the 2?