How to remove the pressure side cleaner, remove hose and seal hole.

[PoolFunMD]

Hi there. Recently had my Polaris booster pump die along with my 8+ yr old Polaris 360 cleaner.

Replacing it with a Dolphin Premeir.

My question is, what are the steps to remove all the cleaner hoses, pumps, and seal the hole?

 

[HermanTX]

I would not seal the hole.
The suction side of the pump pulls water from the pool return plumbing.
So just connect the plumbing from the suction to the dedicated pipe for the pressure side cleaner and you have another return to the pool. It already acts like a return when the booster pump is not on as water flows through it.
So once you connect the 2 pipes. Just remove the pump and that is it.
Remove the hose and cleaner from the wall fitting.

 

[1poolman1]

Hi there. Recently had my Polaris booster pump die along with my 8+ yr old Polaris 360 cleaner.

Replacing it with a Dolphin Premeir.

My question is, what are the steps to remove all the cleaner hoses, pumps, and seal the hole?

A booster pump on a 360 will KILL the 360.