Hi guys, newbie here. We recent got an inground saltwater pool with spa built. It’s about 12K gallons. Pentair equipments (EasyTouch, Intellichlor, and Pentair UltraTemp heat pump). We have been using the pool for the past 3 weeks without any issues. The heat pump heats up the pool perfectly fine to the set point. This weekend we tried to use the spa for the first time and noticed that the heat pump will heat the spa to the temp that the pool temp is set to but never to 104 degrees which is the spa set point. I changed the pool temp to 86 degrees and the pool heated up fine then I switched to spa mode and heat pump turned on and heated the spa to 86 degrees and turned off. On the heat pump itself it also says “heating pool” instead of heating spa when in spa mode. When I flip through the menu on the heat pump it says spa mode idle. Any idea?