Hayward blue essence trouble

Michaelg

New member
May 5, 2017
1
Titusville fl
#1
I have a Hayward blue essence salt chlorinator that is just over a year old. Today I found it with no display and no light. Seems it's totally without power. I tested the breaker and the wires coming attached to the board and it's good. The fuse is good but there is no power at the fuse that I can tell. Is there someway to narrow down the culprit? Any help appreciated.
 

ping

TFP Expert
LifeTime Supporter
Jun 24, 2011
2,931
Long Beach, CA
#2
Welcome to TFP!

Turn off the SWG and remove the board for the display and reinstall it. Sometimes this helps when there is a bad connection.