Surely there has to be a way. I'll post pic's any help would be much appreciated.
The leak is where the blue is.
The leak is where the blue is.
Two 1.5 T's, one reducer 1.5-.5, one coupler, 1 ball valve Maybe 1' of pipe. Pretty simple fix. Max $35 in parts.
Thanks, I bought house with it that way and I'm still learning.What are the valves for?
You will need to rebuild it from the coming out of the filter past the two tees to the pipe going down. The larger valve might be best to change to Never Lube, the small one depends on what it is for.
You should paint your plumbing. Helps keep it from deteriorating in our sun.
Take care.
Anything I can do to stop the leak a little for a week or two. I have way too much on my plate right now and its still 97 degrees out.Thanks, I bought house with it that way and I'm still learning.
Not sure. I'll have to look when I have more time and I'm still in the pool so I need to run it. Its still 97 here.I have heard that people have tried Gorilla tape, etc. with out much success.
You really do not need to run your pump much right now. Your pool might get some dirt in it but if you add your liquid chlorine, as needed, and brush it around you will be fine. Air temperature does not mean much. Your water temperature I am sure is below 70F and the sun angle is low so not much FC loss each day.
What are the two valves for?
Take care.
Why can't I just cut where it is and throw a coupler into each side temp?What are the valves for?
You will need to rebuild it from the coming out of the filter past the two tees to the pipe going down. The larger valve might be best to change to Never Lube, the small one depends on what it is for.
You should paint your plumbing. Helps keep it from deteriorating in our sun.
Take care.
Why can't I just cut where it is and throw a coupler into each side temp?