Here are the test results after the second refill.
CYA 60
FC 12.5
CC 0.0
TC 12.5
CH 250
TA 120
PH is a little tricky because I couldn’t it to calibrate to 7.2. Got it 7.1 in the standard and pool was 7.5. Played with it but still could only get as close as 7.1 and then pool was 7.6.
overall water looks way better. Maybe a hair cloudy and of course it is going to rain all night. If I’m correct, FC is high and both PH and TA are a touch high while CYA is not ideal but it’s manageable. I’ll do an overnight chlorine test but not sure on how the rain will effect it. At this point, other than to turn on heater, I’m not sure of my next step(s).