First test results. Help with raising CYA

Congratulations! What was the official time it took you to get it sparkling and clean? Love to see the pre and post numbers.
16 official days of SLAM

PreSLAM

pH 7.2
Free chlorine 2
Combined chlorine 1
Total chlorine 3
Total alkalinity 120
Cya <20

PostSLAM (today I've only added LC since finishing to keep up the range)
Ph 7.5
Free Chlorine 6
Combined Chlorine 0
Total Chlorine 6
Total Alkalinity 100
CYA 30

All in all I used
10 gals of 12.5% chlorine (30$)
12 gals of 10% chlorine (30ish$)
4 lbs of stabilizer (15 bucks for 8 lbs)
Pool brush (20$?)
Pool vac head and hose ( 40$?)
2 sleeve nuts (60!!!!$ Dang pool store)
1 lower manifold (80$)
4 cartridges (120$)
1 Taylor 1005 test kit (65, but then sold for 30 when I found out I didn't need it)
And last but not least my most amazing never could a done it without it
TF 100 TEST KIT (80$ I think)

Barring the parts I had to replace and the pointless test kit a whopping 215ish$ to covert the swamp

For perspective the PoolStore Racket Bros. Charged me 575$ to start the pump (without ever opening up the main area where the cartridges are), put my jets in, a new skimmer basket and 20 gals of 12.5 chlorine and walked away (about 39mins of work) Oh and the put the ladder in but didn't wash it off first!

I may be a Noob, but I'll never be poolstored ™ again!
 

Attachments

  • 20200723_130551-COLLAGE.jpg
    20200723_130551-COLLAGE.jpg
    196.1 KB · Views: 56

Enjoying this content?

Support TFP with a donation.

Give Support

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.