Hi all, first time posting after reading through the forum over the last 3 years ever since I became a pool owner. So thankful to have found advice on many topics.
Unfortunately after three years, and admittedly some poor maintenance on my end (rookie!), my Intelliflo VSF 3.0 HP pump crapped out. Started with a loud humming noise (assumed bearings) so took into a local motor shop. It was taken apart and deemed ruined/corroded and needs to be replaced. The wet end is fine and still installed. Hopes were to simply reorder the same motor end and place right back in and reconnect the power. Question is, how do I ensure I order the correct motor end? Attached are the pics from the unit I was able to salvage. On the higher side of cost for me so don't want to order the wrong part.
Think i found the replacement here?
Or since not in stock, ordering part # 356878Z should do the trick?
Unfortunately after three years, and admittedly some poor maintenance on my end (rookie!), my Intelliflo VSF 3.0 HP pump crapped out. Started with a loud humming noise (assumed bearings) so took into a local motor shop. It was taken apart and deemed ruined/corroded and needs to be replaced. The wet end is fine and still installed. Hopes were to simply reorder the same motor end and place right back in and reconnect the power. Question is, how do I ensure I order the correct motor end? Attached are the pics from the unit I was able to salvage. On the higher side of cost for me so don't want to order the wrong part.
Think i found the replacement here?
Pentair Motor Drive Assembly - 356878Z - INYOPools.com
Motor Drive Assembly - 356878Z
www.inyopools.com
Or since not in stock, ordering part # 356878Z should do the trick?