G
Latest activity Postings Media About
-
-
Gguinness reacted to PoolStored's post in the thread Pentair 353132S replacement questions with
Like.
If you decide to rebuild, you want to search google for "Pentair Superflo go kit" This is a kit that includes all the o-rings and seals... -
GThanks. I looked at that sensor, and several similar. I passed because: - battery, (I hate relying on batteries) - wireless, (I hate...
-
Gguinness replied to the thread The Ultimate Thermometer.Wow, nice setup. It's great to see the pool temperature remotely and I've been using the IntelliCenter temperature probe to get...
-
Gguinness replied to the thread Pentair 353132S replacement questions.The VGreen doesn’t have a real time clock so any power interruption would affect the program start time.
-
GAs long as everything works, I would not worry about doing any upgrades.
-
Gguinness replied to the thread Pentair 353132S replacement questions.The on/off relay would work for the VGreen motor if they decided to go that route.
-
Gguinness replied to the thread Pentair 353132S replacement questions.If you have the AutoPilot DIG-220 that does have a relay for pumps. Would be a good idea to put your AutoPilot model into your...
-
Gguinness replied to the thread Pentair 353132S replacement questions.Inyo Pools has parts for the SuperFlo VS, see if they have a tune up kit w/ o-rings and shaft seal. They also offer the alternate...
-
Gguinness replied to the thread Impeller question.You have a firmware mismatch between your indoor and outdoor controllers which is why one has the VSF option and the other doesn't.
-
Gguinness replied to the thread Hayward 2.7 HP VSP no power to panel.Is that with the OmniLogic in service mode? Is anything showing on the LCD?
-
Gguinness replied to the thread Impeller question.That's not an error, but informational. It means that the pump is set to address 1 and local control is disabled as it's now controlled...
-
Gguinness replied to the thread Worth Jandy pump replacement to variable speed and recommedation.You will get better help if you Create Your Signature with your equipment. Do you currently have a FloPro 1.5HP pump? The Jandy ePump...
-
Gguinness replied to the thread New motor needed, looking for thoughts.I don't think your pump is in external control mode. From Installation And User's Guide below. You also need to program speed 1 to 0...
-
Gguinness replied to the thread Automating chemical addition to pools?.Instead of the IntelliChem there is also the IntellipH from Pentair. The member below has a Stenner pump and tank for sale and you can...
-
GI completely agree with you. This idea is one of 20 that roll through my head daily. But you did just describe the friend who got me...
-
-
Loading…
-
Loading…
-
Loading…