Started with an essentially black pool Saturday- lots of leaves, organic debris. Got it all out and started the SLAM process. Just want to make sure I’m on the right track. I’ve been maintaining SLAM via the CYA/Cl chart. Unfortunately my CYA is on the higher end due to adding too much stabilizer on my part. Also have a Hayward sand filter so I’ve heard it takes a little longer with that. It’s gone from brown to a very very hazy blue- definitely still can’t see the bottom after 5 days of SLAM. Will my SLAM be faster if I drain some to lower that CYA? Or does it just need time as long as I maintain free Cl according to the CYA I’m at? Any advice welcome- or if I just need to be patient, let me know that as well.
Current values via Taylor kit this morning:
free Cl- 23
CYA- 60
TA- 100
Added a little chlorine to get to 24 as it recommends.
I’ll attach today’s photo- I think the other images are too large.
Current values via Taylor kit this morning:
free Cl- 23
CYA- 60
TA- 100
Added a little chlorine to get to 24 as it recommends.
I’ll attach today’s photo- I think the other images are too large.