N
Latest activity Postings Media About
-
-
Nnikon5400 replied to the thread cloudy water.I have 2 sets of carts, newer ones are some generic brand (used for about 5-6 months) and 12+ yr old Hayward OEM ones. Hayward ones are...
-
Nnikon5400 replied to the thread cloudy water.PH was 7.2 or lower when I opened. Because I only use liquid chlorine it goes up. But I've been trying to get it down from 7.6 twice...
-
Nnikon5400 replied to the thread cloudy water.I just uploaded picture. I have 4 steps, can barely see the last one. No visible algae, but I can smell chlorine
-
Nnikon5400 replied to the thread cloudy water.I use Leslies to compare CYA reading. I don't know if I can trust their "5" when I see nothing with the tube. I will probalby start...
-
NPool has been opened for almost 5 days. Started slamming and adding CYA right away. CYA reading was 5 (Leslies) Added CYA to ~~35...
-
-
Nnikon5400 replied to the thread hayward pool pump 2hp sp1615-z-1 very loud noise. bearing?.I went with another motor, slightly used one, different size, slightly lower thp (2.2 vs 2.4) but works and I'm happy for now. However...
-
Nnikon5400 replied to the thread How long after adding CYA can I test.So, it's no longer 7 days? Also, is it still recommended to test CYA at room temperature above 70? Thanks.
-
Nnikon5400 posted the thread Shock/Slam vs drain the pool during opening in Testing and Balancing Your Water.hi there. What are dissadvantages of draining and refilling vs shocking during opening? I used to go through 4-8 bottles of liquid...
-
Nnikon5400 replied to the thread pvc bushing leak.Thank you very much! it looks like it's a 15 min job for a plumber
-
Nnikon5400 replied to the thread pvc bushing leak.so the couplers would extend the pipes and then the elbow needs to be slighly larger in diameter to attach to couplers? Are there longer...
-
Nnikon5400 replied to the thread pvc bushing leak.I just updated the video. the bushing is cracked, not the T. Can the bushing be removed from T somehow, or pipe needs to be cut? I don't...
-
NI cracked the bushing when I tried to tighten the spigot. Then I covered cracks with epoxy which lasted for a few years, but it leaks...
-
-
Loading…
-
Loading…
-
Loading…
