Having problems with my IC40 generator. Red flow light is on most of the time, but does go green for a while sometimes.
I have cleaned the Cell.
I have tested the switch with a meter, it seems to open and close red and black wire when I push the metal flapper in the line.
I have even soldered the red and black wire to guarantee the switch is closed. But it still intermittently goes Green and stays Red most of the time.
Also checked for 39 Volts going to the cell it's right at 40V.
I have disabled the easytouch from the cell to allow it to function locally, but the flow indicator still stays Red most of the time.
Any ideas?
I have cleaned the Cell.
I have tested the switch with a meter, it seems to open and close red and black wire when I push the metal flapper in the line.
I have even soldered the red and black wire to guarantee the switch is closed. But it still intermittently goes Green and stays Red most of the time.
Also checked for 39 Volts going to the cell it's right at 40V.
I have disabled the easytouch from the cell to allow it to function locally, but the flow indicator still stays Red most of the time.
Any ideas?