Hi all, new to the forum, thanks in advance for any help you can offer.
I have an EasyTouch4, Intelliflo VSF, iChlor, and Screenlogic2 connected to J20. It was all working fine until a bad storm rolled though. Because so many things were not working, I replaced the main board. Currently, I have the following issues:
1. EasyTouch will not operate the Intelliflo. Pump display shows "Display not active" indicating good comms. Pump work fine on schedule programmed at the unit itself.
2. EashTouch operates all other features, including the iChlor connected to the same J20.
3. Sreenlogic2 Protocol Adapter connected to J20 reads all settings and connects, but cannot control any pool functions whatsoever.
I imagine that both the protocol adapter and the pump RS-485 comms were somehow damaged from the lightening. To fix the pump, what needs to be replaced? The keypad, the drive or both?
Thanks in advance,
Drew
I have an EasyTouch4, Intelliflo VSF, iChlor, and Screenlogic2 connected to J20. It was all working fine until a bad storm rolled though. Because so many things were not working, I replaced the main board. Currently, I have the following issues:
1. EasyTouch will not operate the Intelliflo. Pump display shows "Display not active" indicating good comms. Pump work fine on schedule programmed at the unit itself.
2. EashTouch operates all other features, including the iChlor connected to the same J20.
3. Sreenlogic2 Protocol Adapter connected to J20 reads all settings and connects, but cannot control any pool functions whatsoever.
I imagine that both the protocol adapter and the pump RS-485 comms were somehow damaged from the lightening. To fix the pump, what needs to be replaced? The keypad, the drive or both?
Thanks in advance,
Drew