R
Latest activity Postings Media About
-
-
Rrstrouse replied to the thread Lightning strike fries pool controller.Yep the Building Automation V4 card was what I was referring to. The WhiteBox labs carrier board and EZO circuits round out all of the...
-
Rrstrouse replied to the thread Lightning strike fries pool controller.Yes you do not want 64 bit. There is no advantage and a whole lot of warts.
-
Rrstrouse replied to the thread Lightning strike fries pool controller.If you decide to get rid of the IXIAN then you should get the BAS. It is a much more versatile card. Unfortunately, it does not have...
-
Rrstrouse replied to the thread Lightning strike fries pool controller.@Katodude I would copy the data directories for njsPC and REM. ~/nodejs-poolController/data ~/relayEquipmentManager/data If you have...
-
Rrstrouse replied to the thread Alternative Pool Automation and Sensor/Chemical Control and Integration.You can monitor pressure using a less expensive 5v pressure transducer. While the atlas works fine it requires an I2c connection all...
-
Rrstrouse replied to the thread IntelliCenter and Modbus.IntelliCenter or any of the Hayward, Jandy, and others do not use modbus. They use a protocol on RS485 that has no corollary. NjsPC...
-
Rrstrouse replied to the thread Pentair IntelliCenter Pool Control Dashboard Instructional Guide.Open an issue on the repo and include that capture.
-
Rrstrouse replied to the thread Pentair IntelliCenter Pool Control Dashboard Instructional Guide.Double check to make sure Pentair didn't just push an update at you.
-
Rrstrouse replied to the thread $100 "Poor Man's" Acid Injection.My recommendation would be to buy the Pentair Pump/Tank combo 522472 and integrate it into njsPC Chem Doser. The tank/pump is done...
-
Rrstrouse replied to the thread $100 "Poor Man's" Acid Injection.At 1mL/minute your SWG would almost never run if you disable the chlorinator during dosing. The tank/pump for IntelliChem puts out...
-
Rrstrouse replied to the thread $100 "Poor Man's" Acid Injection.You know there is a Chem Doser component (different from the more advanced REM Chem) in njsPC that will maintain a max 24 hour dose...
-
Rrstrouse replied to the thread Pentair IntelliCenter Pool Control Dashboard Instructional Guide.No matter what you do the rpm range on the pump is 450-3450rpm and the flow rate is between 15-130gpm. njsPC should be able to handle...
-
Rrstrouse replied to the thread Pentair IntelliCenter Pool Control Dashboard Instructional Guide.I'll have a look. But if you could post a replay on the repo that would be great. It looks like it is trying to switch all the speeds...
-
Rrstrouse replied to the thread Pentair IntelliCenter Pool Control Dashboard Instructional Guide.Which IC firmware version are you running?
-
Rrstrouse replied to the thread Alternative Pool Automation and Sensor/Chemical Control and Integration.@MyAZPool you know that chlorinator label is mis-aligned. I didn't want to say anything but it has been bugging me. :D
-
-
Loading…
-
Loading…
-
Loading…