New pool owner: I have a Pentair Easytouch control 4 with a Pentair intelliflo VSF pump. Every morning I receive alerts on the Screen logic app indicating the pump has lost communication and there is a power outage. On the Easytouch pannel, the red LED over the F button is out. I can "reset" the pump, by pushing the F button on the Easytouch panel, the led turns on and the pump works fine, until the next morning. I have attached how the control is wired. I am thinking that the pump is wired to the relay and it should not be according to threads on TFP. I would appreciate any assistance in learning if the pump is wired incorrectly. Thank you.