I'll check the actual bottle. Purchased at Home depot, storing in patio shade, we usually have a breeze on our patio. I'll bring it inside the house. I also ordered new powder, mine is clumpy and came half filled, I have a hard time dissolving it, so I purchased a new one which will arrive Sat.
I use the Taylor 2006 kit to test the FC outside using the sky and double checking with a white paper to verify its clear. Use 2 level spoons to test, but first I try to crunch up as many clumps as I can and not use any powder that is clumpy, I'm mostly successful doing it that way.
I use the pool math calculator using bleach at 10% (128oz) my current FC and target FC at 16 (per my original CYA). I just added chlorine at 10:30 and tested at 12:20 and the FC was 11.8. I then tested the FC after 30min and the new FC was the same. Something is definitely wrong here. Here are the numbers.
10:30 am FC 8.4 CC 0 added 7.8oz chlorine
12:15 pm FC 11.8 CC .6 added 4.3 oz chlorine
12:50 pm FC 11.8 CC.4 too soon to add.
I have attached pics of the Chlorine info and 2 of the pool. We are definitely headed in the right direction, the pool is no longer cloudy, but if the numbers are wrong I don't think we will be going in the pool until we figure this out. We want to use the pool this weekend since is supposed to warm up. Maybe I will head down to Leslies and purchase some new DPD powder today....
'