Now head out there with the plans and a tape measure. Is it long, deep, wide, etc enough? Add about 8" for the shell, steel, and plaster.
One thing you can do is walk VERY carefully in there and push all of the wire ties down so there is NO chance of them poking through the shell and causing rust on the plaster.
I would run down to Lowes and grab some rebar caps.
Kim![]()
I’m too big and clumsy oaf-ish to try. I’d trip on the second or third square and the whole thing would come down like a house of cards. Here’s hoping you’re more nimble than me Foo
Maddie I bet if they had seen the pictures of rust stains on brand new plaster they would understand our concerns. The next best thing would be to point them out to the pb and see if he will have someone work on it.
Maddie I bet if they had seen the pictures of rust stains on brand new plaster they would understand our concerns. The next best thing would be to point them out to the pb and see if he will have someone work on it.
Why are those upright pieces of rebar even there ? I had seen this on another build as well. It sure looks like they will be bending them over so they go into the slab. I always thought the slab and pool beam were supposed to be separate so if the slab moves it does not put pressure on the pool wall.
I wear a 14 shoe, I don't think my feet will fit in the square without some kind of awkward footwork.