I use the ESP-IDE.
Attached my file. This you can compile and flash.
But the wifi manager is a bit bugy. i have to try it some times to join to my network.
Good Luck.
Automation of INTEX SWG
- Thread starter tonyflores1006
- Start date
Attached my file. This you can compile and flash.
But the wifi manager is a bit bugy. i have to try it some times to join to my network.
Good Luck.
Thank you so much! I had a successful upload last night, but the ESP couldn't connect to my network, kept rebooting. I'll give it a go with your files. Appreciate the help mate!
Just a quick update: Building the project was a real pain, but I got it done. Unfortunately, the ESP manager can't connect to any of my wifi networks, so I gave up on it... I removed the original control IC and replaced the SWG's brain with an Arduino. Thanks again for your help, I hope others have more success with the project.
Ohhh ok.
That sounds also interesant.
Can you share this and explain how does it works?
Thanks.
Last edited by a moderator:
Hy together,
I got the code compiled in VSCode and transferred it to my ESP32 the AP was started and I was able to log the ESP to my WIFI Network.
Now I try to start with Homeassistant integration and I´m wondering if anyone has done it already and can help me with that challenge !
I created a new View and put the code in it to see the SWG and the LEDs. That looks fine so far. Then I create a new flow in NodeRed but
here is my problem. Of course, the entities are not known in Homeassistant and actually, I have no clue how I can get this fixed. I just started
with Homeassistant and it seems that I need a bit of help
If anyone has time to support me it would be appreciated.
I got the code compiled in VSCode and transferred it to my ESP32 the AP was started and I was able to log the ESP to my WIFI Network.
Now I try to start with Homeassistant integration and I´m wondering if anyone has done it already and can help me with that challenge !
I created a new View and put the code in it to see the SWG and the LEDs. That looks fine so far. Then I create a new flow in NodeRed but
here is my problem. Of course, the entities are not known in Homeassistant and actually, I have no clue how I can get this fixed. I just started
with Homeassistant and it seems that I need a bit of help
If anyone has time to support me it would be appreciated.
@jressel01 @Jings great work. I'd love to integrate this into my SWG, unfortunately I have the 18 pin version on a QS500 / ECO5220G
Any news on getting it to work on that version?
Hello, first of all thanks a lot for the work done on this subject.Hy together,
I got the code compiled in VSCode and transferred it to my ESP32 the AP was started and I was able to log the ESP to my WIFI Network.
Now I try to start with Homeassistant integration and I´m wondering if anyone has done it already and can help me with that challenge !
I created a new View and put the code in it to see the SWG and the LEDs. That looks fine so far. Then I create a new flow in NodeRed but
here is my problem. Of course, the entities are not known in Homeassistant and actually, I have no clue how I can get this fixed. I just started
with Homeassistant and it seems that I need a bit of help
If anyone has time to support me it would be appreciated.
I bought an SWG from Intex and got the TM1650 16 pins version. I also got the PCB from jingsno to help integrate the ESP32.
Know I am struggling so much to compile the project from jressel1 in ESP-IDF
.It seems a lot of includes are wrong or have maybe changed ....Has anyone tried to compile it recently? Maybe with a newer version of ESP-IDF?
[Sorry I edit my own message, got it to work with ESP-IDF 4.4.7. I think WifiManager is a bit buggy but this is not the most important as long as it connects. Now I need to test connection with my Intex SWG and we'll see.
]Thanks a lot for your help,
Christophe
Last edited:
Hello,Hello, first of all thanks a lot for the work done on this subject.
I bought an SWG from Intex and got the TM1650 16 pins version. I also got the PCB from jingsno to help integrate the ESP32.
Know I am struggling so much to compile the project from jressel1 in ESP-IDF
Has anyone tried to compile it recently? Maybe with a newer version of ESP-IDF?
[Sorry I edit my own message, got it to work with ESP-IDF 4.4.7. I think WifiManager is a bit buggy but this is not the most important as long as it connects. Now I need to test connection with my Intex SWG and we'll see.
Thanks a lot for your help,
Christophe
One last message on this thread as it seems it has been inactive for quite some time. Too bad because this is very interesting to me and "almost" got it to work. I almost read the status correctly, I almost POST the commands correctly but still there are some problems I can't identify with my little knowledge of ESP IDF.
Anyway, if someone is still active or can redirect me toward a working project to control Intex SWG I would be very thanksful.
Have a good day,
Christophe
Hello,
my Code works without any Problem. But this Year i change the Intex Elektronic to my Own Elektronic with ESPHome. So i cant test anything.
with two Shunts "Digital Paneel Meters 10Amp 75mV DC" i can read the A. <3A low Salt over 8,5 A high Salt
After the firt test i change th e Power Supply. MeanWell XLG-200-12-A 192W 12V 16A LED Netzteil IP67
my Code works without any Problem. But this Year i change the Intex Elektronic to my Own Elektronic with ESPHome. So i cant test anything.
with two Shunts "Digital Paneel Meters 10Amp 75mV DC" i can read the A. <3A low Salt over 8,5 A high Salt
After the firt test i change th e Power Supply. MeanWell XLG-200-12-A 192W 12V 16A LED Netzteil IP67
Attachments
Last edited: