Air bleeder
- Thread starter Kevjencrane
- Start date
- May 3, 2014
- 58,391
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Can you help us out with some more information? Best is to fill out your signature -- see Create Your Signature - Further Reading
I suggest you read ABC's of Pool Water Chemistry.
Can you help us out with some more information? Best is to fill out your signature -- see Create Your Signature - Further Reading
I suggest you read ABC's of Pool Water Chemistry.
K,
Most likely, some dirt has gotten the valve assembly and it is not closing completely.
I would take this as an opportunity to open and clean your filter.. When open, I would use a garden hose to send water through the valve in both directions. If that does not solve the issue, then I would replace the whole valve assembly.
Thanks,
Jim R.
Most likely, some dirt has gotten the valve assembly and it is not closing completely.
I would take this as an opportunity to open and clean your filter.. When open, I would use a garden hose to send water through the valve in both directions. If that does not solve the issue, then I would replace the whole valve assembly.
Thanks,
Jim R.
That’s exactly what it was Jim! Just needed to have the threads cleaned out. Thank you so much! Works perfect!
