I just set up new equipment- my Intelliflo will not run from the ET8 when in AUTO mode, it will only operate from the the Intelliflo keypad when in SERVICE. I set up the pump in the ET8, set a schedule, clock is right.... no clue. I cleared the EPROM and started over and now the POOL indicator is not on the ET8 screen- just LO-T... Pool is being replastered today and I will need need a 24 hour pump running. I can run it in SERVICE but would like my ET8 working right. I have no PB involved- the equipment is self installed and wired by a licensed electrician. Any help would be great.