aquacal

Hi everyone, we just finished building our pool and I noticed that on our new AquaCal Heater/Chiller on Cooling Mode it puts out hot water and cold air from the fan, identical to Heating Mode. I've gone through the settings on the unit and didn't find anything obvious and haven't been able to...

I have an AquaCal Heatpump, with a dial, that says PoolSync ready. I picked up an AquaCal ECP0343 Wifi Controller and followed the instructions, but it doesn't work. When powered on, the lights blink 3 times and then turn off. Pressing reset, the Offline light comes on and stays on. The...

Hi! I'm hoping you all can help. Below is what is happening from the electrician's notes. We narrowed it down to the heat cool unit. All tight connections everywhere. "According to his home monitoring system, lights in the main house and garage (a main panel and subpanel) were flickering along...

My PB recently installed a Hayward OmniLogic and an Aquacal super quiet heat pump. The two are connected via 2-wire mode for automation. The Aquacal manual offers a SMART bus mode (comm) but does not describe the operation benefits. Does anyone have any insight if it’s worth the time to open...

I have a Aquacal heat pump model 166ARDSBNP (heater and chiller) that I would like to control via my recently installed Pentair IntelliCenter. With my previous Intellitouch, I had been told cooling was not supported in intellitouch. Pentair recently told me that both heating and cooling are...

Hi All, just got an Aquacal Heat pump. Is it normal for it to pool water around it? I understand it condensates but it seems like there's a steady stream from one of the holes. https://youtube.com/shorts/6Aefz4z4YNw?feature=share It does not seem to have a stream of water when it's off...

Hello TFP! I have an AquaCal heat pump that has never worked in the 2 years I've owned the house/pool. This weekend it started leaking and I don't have a bypass installed. It looks like there is a fitting in the "in" side of the PVC that goes to the pressure switch. That fitting is what...

Hello TFP! I have an Aquacal heatwave Icebreaker 5302b heat pump for the pool. I haven't gotten it to work the entire year I've been at this house and I'm hoping to get it working so I can extend this season. The issue is that simple, when I turn it on and it starts heating (or cooling)...

Hello all! I recently had an AquaCal SQ225 Heat pump installed... I asked the installer about connecting it to my Intellicenter and he didn't know if it could be done. The instructions reference the EasyTouch and IntelliTouch, so I assume it can work with the IntelliCenter too. I attempted to...

Hello, First time posting, just joined. I have a 16x30 liner pool 6' deep end 14,400 gallons. pool and system is new only open 1 1/2 months last summer before it was closed for the winter. i live in Georgia. i've been having issues keeping the chlorine levels up. i have an Aquacal Autopilot...

I just replaced a circuit breaker and then powered-up my 9-year-old AquaCal SuperQuiet pool heater, and now the heater will not start-up. The heater display board gives a CEr indicator (communication problem). Likewise, my 9-year-old Pentair EasyTouch remote control system in the house now...