Search results

  1. W

    Rj45 all readings except temp reading 0

    Had a rain storm yesterday. Went to check salt level. The SWG has all green lights but salt level, cell voltage , and amos all reads 0. Although generate light, and power all green and no flow light is off. Tried to unplug and reset. Unplugged generate from control, restart low flow light...
  2. W

    RJ45 SALINITY READING

    Ok so all is working. At the end of the pipe going into the pond when set to super chlorinate there is a cloud going into the pond with bubble on the surface. Is this normal?
  3. W

    RJ45 SALINITY READING

    What do I look for?
  4. W

    RJ45 SALINITY READING

    No its grass and debris. I wondered about why its getting past the sand fiter. Maybe I need more sand in the filter? Sorry really new to this. The filter is about 1/2 to 3/4 full with pool filter sand.
  5. W

    RJ45 SALINITY READING

    No I think you are seeing a little piece of grass. Saw that too had to look twice. Will that hurt if its iron? Is there a e at to control it?
  6. W

    RJ45 SALINITY READING

    Noticed tonight this rust color at end of cell is this normal?
  7. 0621211745c~2.jpg

    0621211745c~2.jpg

  8. 0621211745a~2.jpg

    0621211745a~2.jpg

  9. 0621211745~2.jpg

    0621211745~2.jpg

  10. W

    Rust on cell

    Pictures is this normal?
  11. 0621211745c~2.jpg

    0621211745c~2.jpg

  12. 0621211745a~2.jpg

    0621211745a~2.jpg

  13. 0621211745~2.jpg

    0621211745~2.jpg

  14. W

    Rust on cell

    Ran my new SWG RJ 45 on full max 24 hours have rust coloring at end of cell. Is this normal?
  15. W

    RJ45 SALINITY READING

    I agree thanks will wait until get test kit here to get good numbers.
  16. W

    RJ45 SALINITY READING

    Thanks for the info. It took several days for the RJ45 to be happy with salt level even though numbers did not change a lot. Also amps on cell now show positive 4.09 or so....
  17. W

    RJ45 SALINITY READING

    Update Ran overnight still making chlorine low salt light off. Instant salt reading is 2950.
  18. W

    RJ45 SALINITY READING

    Thanks lot of work
  19. W

    RJ45 SALINITY READING

    Can you recommended a good meter? Like something easy that employees can check.
  20. W

    RJ45 SALINITY READING

    It is now up to 2900 seems to be making chlorine still has low salt light on.
  21. 0620211538a_HDR~2.jpg

    0620211538a_HDR~2.jpg

  22. 0620211539_HDR~2.jpg

    0620211539_HDR~2.jpg

  23. W

    RJ45 SALINITY READING

    No not positive about volume, its 40 by 60 shallow, deep spot 5 foot shallow end 1 foot. Ran calculation when filling 108 hours at 6 gallons per min equals 38000 gallons. Ran pump return bottom of pond, ran over night now making chlorine, low salt light bill now every so often. Says 2660 ppm...
  24. W

    RJ45 SALINITY READING

    I do not have flow light just low salt.
  25. W

    RJ45 SALINITY READING

    Well had campers stir it up still only reading 2400 ppm notice everytime start SWG its always reads negative amps -4.19 amps or so. Then it runs 10 min cloud at end of cell but low salt light blinks and stops making chlorine.
  26. W

    RJ45 SALINITY READING

    This was before pump and waterfall over rocks was installed.
  27. 00r0r_iPwTf87lrFTz_0bK08O_1200x900.jpg

    00r0r_iPwTf87lrFTz_0bK08O_1200x900.jpg