Search results

Hi All, We've had our pool for almost 2 years in July. We have 3 lights in the pool, unfortunately the middle one fell outta sync. By reading this forum my guess is one or two of the LED colors have failed? I've put it in service mode and switched it on / off for 5 seconds in which all 3 reset...

Here in North Texas, salt water pool, we’ve had quite the heat stretch the last month over 100 Each day, and our pool constantly gets 11-12 hours of direct sun a day. I’m having to run the SWG at 100% lately just to even TRY to keep up, typically I would be running the pump 8 1/2 hours a day...

Hi All, Quick question, our pool/spa recently got completed in July. We've noticed that when going to spa mode the jets/bubbles don't fully activate unless you turn on the blower first for say 3-5 seconds then turn it off. If If you leave the blower on then you also get the really big extra...

I have a Taylor salt test kit on the way. Can't be here until Sunday. SWG (Jandy Aquapure 1400 shows 3000). Just happened to take my sample to Leslie's for the heck of it and they showed 1900. Anybody had this far of a discrepancy. I also have a Taylor Pool Kit We have a new pool since July...

How is one getting the FC levels to 4 or 5 with a SWG? We just had our new build converted yesterday and FC levels are at 1.8 at 85% output with the Jandy Aquapure PLC 1400. Tested with a Taylor K-2006c kit TA - 90 CYA - 30 (Just had about 1 1/2 days of rainfall. FC - 1.8 PH - 8.0 (just put...

Hey guys, Quick question. We went with a salt system for our new PB, we scrapped the Ozone+ UV however the PB inadvertently installed the Paramount Ozone module as well when the equipment arrived a couple weeks ago. It wasn't on our cost sheet so we were told its nothing that we paid for...

Hi All, I've got some catching up to do as we broke ground on Feb 1st with our pool build here in the North Texas area. Baja Shelf is 9" Deep and secondary shelf is 15" deep. Design pictures attached below. We were in the $100k range with everything below. Any other critique or help would be...

Hi All, We are looking to sign our contract this week with our local preferred pool builder. Please see attached below for critique and pool equipment review. Originally we were budgeting around 85k and we're coming out the door just shy of 101 and I'm sure we'll have some tweaks involved...

Hi All, Trying to get some feedback on a new pool project here in Fort Worth, TX. Any feedback is appreiciaetd. We'll probably go with a robotic cleaner instead Polaris Quattro (What are the main differences between the two) - Pros/Cons of having to plug it in all the time and having a cord...

Hi All, We're looking at a new pool build here in the DFW Fort Worth area. We've had several pool bids so far, but wanted to get people's opinion on this below with cost. They've all seemed pretty high, as the range we've seen has been in the lower 80's to 110k with some of the other builders...