Search results

I just purchased a V green 240v motor. Starting to connect it to my Pentair EasyTouch panel. Do I still use the pump relay circuit from the EasyTouch or do I connect it directly to a 240v breaker? If I use the EasyTouch relay to power to the pump, the power will be gone when it turns the...

I have a Paramount pool cleaner that is not working. Was thinking of changing to an A&A because of the availability of rebuild kits. Is this worth it? Will the six ports align wit h my existing six pipes?

I have a Paramount 6 port water valve that is not working. Took out the gear module and all looks fine. Removed the gear collar and found 6 balls covering 6 holes. How does this thing work? I see a cam that pushes the ball off the hole. Is there supposed to be some sort of gasket over these...

I'm trying to setup aux valve A to operate my solar panel diversion on an easytouch. I have everything connected but I cant get the valve to rotate to bypass. I have solar enabled in the panel but I only get power on the black/white wires. Weather on Spa or pool the power is always on the...

New pool owner in Florida. I am a snow bird, about 5 months in Florida. I have solar panels on the roof. Is it OK to fully bypass the panels in the summer when I am not there . Or do they need water in the hot sun?

I noticed that the whisperflo curve in the user guide is different from the whisperflo curve I get online (inyo & others). Did Pentair change there calculation method or is it something else?

Just replaced pool control with an easytouch PSL4. Old system had heater connected with 3 wire system. I will connect with 2 wire from J19 to mastertemp firemans switch. Question I have is do I need to be concerned about the jumper setting on the operating control board (external control...

I cannot find any information on how to use the "special purpose relay outputs" on my psl4 easytouch. One is marked solar booster pump but I don't know what to do with it. These outputs are not explained anywhere in the manual, that I could find. Is there a special manual for these?

New pool owner trying to remove cloged jet in pool spa. Removed the nozzel and found a plastic socket end deep in the wall. Appears to be 5/8". Got a wrench and extension and turned the jet nut counterclockwise. It just keeps on spinning but does not come out. The jet hole is in the middle...

New pool owner with lots of questions.