Search results

Hi sktn77a, Yes the warranty on PureLine Prime is intact if you install the pump yourself and it does not need to be installed by a "Professional"

Hi bear30956, We sell quite a few heat pumps (various brands) and I would agree with your assesment. I would suggest the Hayward HP21404T 140,000 BTU Heat Pump I like this unit as it has one of the highest BTU Ratings at 140,000 BTU's meaning it will heat your pool quicker than others (the...

Hillyjd, Can you post a few photos of your plumbing?

Hi hillyjd, The first think I would check is to see if you are pulling in air anywhere common areas would be the lid oring, any unions or valves on the suction side of the pump and any fittings on the suction side of the pump. You can take a bottle of sopy water and spray all of these areas to...

The Quad DE is nice but you are looking at also being the $1,000 range for this filter and it sounds like you wanted something more economical. I really think you will be fine with Hayward 175 Sq. Ft. as this filter has a quite a larger flow rating than the current filter that you are happy with...

Any luck getting the impeller off?

Could you post a few photos of your light to this thread?

Hi Patbell, The Colorlogic Universal Lights do have a Mode Called ColorLogic 2.5 & earlier mode: "Use this mode when installing your new light in systems with ColorLogic 2.5 & below lights. The Universal ColorLogic light will be “seen” as another ColorLogic 2.5 & earlier light and will operate...

Olivier, The motor on PureLine Prime has an 18 Month Warranty and the pump housing has a 12 month warranty. We are currently in the process of getting the PureLine Pump Energy Star certified, the pumps are at the testing facility as we speak and we have been told we should have Energy Star...

Hi Olivier, I do think the Intelliflo would be overkill for your set up. 1.5" plumbing can only handle 60 GPM so even if you had a 10 HP pump you physically can only get 60 gpm through the 1.5 inch plumbing. With the Intelliflo you would be paying for the higher HP range (i.e. the HP range...

Hi Mak104, Based on the information you supplied I think you would be fine with the Hayward 175 Sq. Ft. Cartridge Filter as it has higher flow rating and a larger cleaning capacity then your current filter which you were pleased with. It is true that the larger the filter the better so...

Hi DcAlce, It does sound like your ColorLogic light is not functioning properly, the manufacturer of the light is Hayward and there contact information can be found here Contact Us Form | Customer Service - Hayward Pool Products Australia

Hi Mak104, A few more questions.. Could you supply the Manufacturer, Model # and Square Footage of your Current DE Filter? Before your DE filter needed repairing were you happy with its filtering ability?

Hi PoolBill, The ColorLogic can be cycled through the colors of the light by powering the light on and off relatively quickly, so as long as you can hook up the iDevices switch to turn power on and off to the light then you can cycle through the colors and color shows. However, you will not get...

Hi Phillijp, If you are going to add solar then I would suggest a 1.5 HP pump and you will want a High Head Pump to get the water up to the roof, something like the Hayward Super II Pump.

Hi Phillijp, Based on your pool size I think a 1 HP would be fine. I personally like the PL2601 1 HP PureLine Prime Pump. I like this pump because it has a Century/AO Smith motor which we have found to be the most reliable motor, the pump comes with quick disconnect unions and large 2" plumbing...

Hi TxRenegade12, There should still be parts available for your Pentair Platinum Legend Cleaner, could you let me know which parts from the attached diagram that you require?

Hi Jdpool86, As far your replacement goes, I would replace just the motor and you have 3 options for replacement, which is a single speed motor, dual speed motor or variable speed motor. The single speed will be the least expensive up front and the dual speed a variable speed are more expensive...

I second the strap wrench we've had good success using this.

Hi LakiRed, You have 3 options for replacement and it all really comes down to how much you want to spend up front vs. the ongoing operational costs. The least expensive up front cost would be staying with your current ST1152 Single Speed Motor ($247) The next option is a 1.5 HP Dual Speed...

Hi LakiRed, If you are wanting to replace the motor with the same single speed motor then you will need to double check the Service Factor (SF) from your motor label. If your SF is 1.0 then you will need this UST1152 1.5 HP Up Rated Replacement Motor if your SF is 1.5 then you will need this...

Hi RoxyandGil, Could you supply me with the make, model, voltage and wattage of your light? Also if you have any part #'s or if you could post a photo to this thread that would be quite helpful.

Hi Sandy Pool, Unfortunately there is not a pool light as you described. I know having another niche installed into the side of the pool would be a major project. You might want to consider one of these lights here that hang over the wall of the pool NiteLighter® 100 Watt "Ultra" Underwater...

When I originally read this post I thought this was for an above ground pool but upon re-reading it I noticed it is an inground pool, so I think the SP1085 skimmer is the way to go.

Hi Joe Terry, It does sound like the PCB board inside the Hayward ColorLogic is going bad, the exact same thing happened to me on my light. The downside to the LED lights that use a PCB board instead of a bulb is that the entire light fixture needs to be replaced when the board/bulb goes bad. I...

Hi Work4rus, Another option is the Hayward SP1091WM Widemouth Skimmer which is specifically designed for above ground pools. I believe the SP1091WM has a few additional accessories specific to above ground pools, it to is 1.5" but you will be fine using a 2" adapter as cowboycasey suggested...

Hi Ryker, I don't believe there is another light that will fit in the Glo Brite Niche. I was thinking that the Hayward Nicheless 320 Light may work, but after furhter investigation they are longer than the globrites and wouldn't fit in the niche. The colorlogic manual says you need 9" min for...

Hi Marknym, You have this SplashPak SS160 Sand Filter which did not use the Hayward SP0714T Valve it used this Jacuzzi 15VK Valve the 15VK valve uses this Splash Pak Spider Gasket which is slightly different than the gasket used in the Hayward SP0714T Valve, this is probably the reason for your...

Hi Jaura, Could you take a few photos and post to this thread? The more photos you could post the better. Thank You Patrick