Skimmer replacement

[work4rus]

I am replacing all pool lines myself in my vinyl pool. Converting from 1.5" to 2" as well in the process. Seems like the right time to replace the skimmer, but I have trouble finding one with the huge opening like mine. It is currently about 15"x6" inside and 18"x9" on outside of the frame. I assume I need the same size as there's a hole of this size in vinyl and steel. Any advise on where to find one?
Oh and a small follow up, it seems there are no 2" inlet/jet fittings and it's OK to use 1 1/2 inch MIP Thread fittings?

 

[kimkats]

I have a PM into a couple of people that might be able to help you out. Give them a few to get back with you!

Kim

 

[work4rus]

Thank you Kim!
The largest I have found is Hayward SP10852OM. It seems the opening is correct:15 1/2" x 5-11/16", but it is 1-1/2" pipe and I need 2". Since I don't see other options I guess that's the one I'll have to go for. BTW, I have found this useful Hayward Skimmers pdf

 

[cowboycasey]

That one will work just fine, there's another part that I can get you once I get home that will connect up perfectly to that... it will change that one and a half inch threaded to a 2 inch slip...

 

[work4rus]

Thank you cowboycasey - let me know! I've just bought the skimmer.

 

[patrick3229]

Hi Work4rus,

Another option is the Hayward SP1091WM Widemouth Skimmer which is specifically designed for above ground pools. I believe the SP1091WM has a few additional accessories specific to above ground pools, it to is 1.5" but you will be fine using a 2" adapter as cowboycasey suggested. The SP1091WM is 14 inches wide.

 

[cowboycasey]

I am not sure about 1 thing

That Skimmer, does it have 1.5 inch threads or is it a slip.... I believe it is slip because you have an inground pool and slip would be better for that..

****************************************************
If it is slip just go to lowes / Home Depot and get a 1.5 inch to 2 inch slip pressure pvc fitting..

****************************************************
If it is a threaded connection use these, these will also work for returns

these will work to go from your skimmer 1.5" to 2 inch pipe, you can also use them for returns or suction side vacuums using a 1.5 inch npt through wall

2 Union plumbing joints 1.5 Swimming Pool spa Pump Slip fitting CPVC | eBay

https://www.amazon.com/Plumbing-Joints-Fitting-Connector-Replacement/dp/B01L7ARONC

I hope this helps

 

[patrick3229]

When I originally read this post I thought this was for an above ground pool but upon re-reading it I noticed it is an inground pool, so I think the SP1085 skimmer is the way to go.

 

[work4rus]

Mine is in-ground, so that skimmer won't fit for me.

- - - Updated - - -

Thank you for the help anyway!