Any of you easytouch pros out there know if I can get an easytouch to run a pool and spa with separate equipment, spa heater is electric, pool is on a heat exchanger and will need an actuated valve?
Thanks!
Thanks!
Easy touch for 2 heaters?
- Thread starter RDspaguy
- Start date
An existing EasyTouch? Pentair makes a dual-equipment Intellicenter upgrade for the EasyTouch.
IntelliCenter Upgrade Kit (POOL/SPA DUAL EQ AFTER 2012)
This Pentair IntelliCenter Upgrade Kit is for all EasyTouch and IntelliTouch systems manufactured after 2012. Update your pool control system today!
www.epoolsupply.com
No, upgrading an old pool and spa running on hardwired components.An existing EasyTouch? Pentair makes a dual-equipment Intellicenter upgrade for the EasyTouch.
IntelliCenter Upgrade Kit (POOL/SPA DUAL EQ AFTER 2012)
This Pentair IntelliCenter Upgrade Kit is for all EasyTouch and IntelliTouch systems manufactured after 2012. Update your pool control system today!
You would need to get the power-center as well as the kit.
RD,
The EasyTouch does not have "dual equipment' controls...
The IntelliTouch does have a dual equipment" circuit card, but you would be better off with the new IntelliCenter with the "dual equipment" card installed. Either way it is $$$$$
Not sure how much control you need, but it might make sense to use two 'lite' version EasyTouch systems.. One for the pool and one for the Spa.
Thanks,
Jim R.
The EasyTouch does not have "dual equipment' controls...
The IntelliTouch does have a dual equipment" circuit card, but you would be better off with the new IntelliCenter with the "dual equipment" card installed. Either way it is $$$$$
Not sure how much control you need, but it might make sense to use two 'lite' version EasyTouch systems.. One for the pool and one for the Spa.
Thanks,
Jim R.
And with the electric heater I can use a relay and feed it off the board, or do I need to feed the low-voltage gas heater connection somehow?
Similar threads
