Recent content by LittleTagAlong

I'm confused about pH. I thought if your FC was high, that reading on pH would be inaccurate.

So do I keep it at SLAM level? Today it is 9.5/0.0 and 56°

Thanks. My water was right at perfect when freeze came. I went to Dollar General and bought "cleaning" bleach - 6%, making sure it was manufactured in the last 2 months. This pic shows how clear it is 2 weeks later, even with leaf debris. Plan on cleaning that this weekend, then putting mosquito...

We had a hard freeze a couple of weeks ago. I was ill so things didn't get done like they should have. I used Pool Math app, added bleach to SLAM level, ran pump 24 hours. Detached sand filter and SWG, taking everything indoors except sand tank. Left plunger valves on pool. My question is what...

Sorry, previous post has wrong parts shown. Use these parts to set it up: 1. Vacuum hose with clamp from Deluxe Maintenance Kit #10797 2. Hose Adapter A with collar #10849 Slide hose with clamp over narrow end of adapter, tighten. Attach this to your plunger valve. I removed hose from bottom...

I have used my intex vacuum hose attached to a shorter regular hose to drain with sand filter pump. The vac hose is clamped to the "B" adapter with a regular hose clamp. The b adapter screws onto regular hose. Pics won't have vac hose because it's still in tote outside. Lol

I take everything inside except the sand tank. I do put the sand shield back in to protect the center pipe hub. I leave the plug off and wrap a tarp around the tank and secure with straps. On my third year of same sand.

Tested CYA last night---70. Happy, happy!

Thanks, I appreciate the help.

Found it: page 16 Intex Easy Set and Hayward skimmer install???

Ask jcp

Just as I was tying the sock with 51 oz of CYA to the skimmer, it BUSTED! More than half went into skimmer basket and, of course, into sand filter. Pressure bottomed out. Shut it off, took all the hoses off and the pump -- rinsed them as well as I could; backwashed sand and rinsed. Pressure...

Check out page 102 on this link. There's another with PVC, but I'm haven't found it yet Trouble keeping Intex Easy Set Ring Inflated

So , yes, add stabilizer????

Not refilling. And only had 1/2 inch of rain 3 days ago