Recent content by jfh342

  1. J

    Just opened pool and Zero CC

    Noted. Thank you.
  2. J

    Just opened pool and Zero CC

    Thanks to all who assisted. This is a great forum for exactly the type of issue I was dealing with.
  3. J

    Just opened pool and Zero CC

    The 50/50 pool water/tap water resulted in 6PPM. I was finally able to get a reading from the pool after that and it is 11PPM. I'll check again in the morning. It seems to have fixed itself.
  4. J

    Just opened pool and Zero CC

    Tested my tap water and recorded 2ppm. So reagents are good. I guess I'll just do nothing and wait to see if it becomes testable when the chlorine level drops. It's somewhat unsettling not knowing how high it is. I have never had this issue in the past nine years. I have successfully tested with...
  5. J

    Just opened pool and Zero CC

    The chemicals were purchased on March 23, 2023. I cannot find any details about the OTO chlorine test (R-104).
  6. J

    Just opened pool and Zero CC

    The color of the new powder is white. No grey tint at all, which I thought unusual.
  7. J

    Just opened pool and Zero CC

    It'll probably take a few days before I receive the new R0870 in the mail, but I'll be sure to come back and post the results. Thank you all for your support!
  8. J

    Just opened pool and Zero CC

    Completed the 10 minute drill with no changes using the R0870. I did a second test with the K-1000 test kit and that one is showing that there is chlorine present. I must have a bad batch of R0870. To be sure, I added a drop of bleach to the 10ml and then added the R0870 and other than a micro...
  9. J

    Just opened pool and Zero CC

    Water looks fine. It's clear.
  10. J

    Just opened pool and Zero CC

    I filled the holder to 10ml and then added one scoop of r-0870 and it did not turn pink.
  11. J

    Just opened pool and Zero CC

    "To confirm ... you should be doing the FAS-DPD (powder & drops) in a 25ml tube. Fill the tube to 10ml. Then add one generous scoop of R-0870 powder and start mixing. Add R-0871 drops until clear and divide the result in half. Example: 10 drops to clear equals an FC of 5." That is what I am doing.
  12. J

    Just opened pool and Zero CC

    I am not focused on CC, I am just reporting all the numbers from the instructions that came with my Tftestkits TF-100 FAS-DPD Pool Water Test Kit.
  13. J

    Just opened pool and Zero CC

    So it's safe to just keep adding liquid bleach by the gallon until I get a FC reading? I would have thought the initial 4 gallons would have shown something. Then I was more surprised that the HTH shock did not do anything either.
  14. J

    Just opened pool and Zero CC

    Bleach was just purchased from Walmart.