Recent content by firstpool3304

  1. F

    Would broken flex air relief assembly lead to DE in pool?

    I noticed DE was being put back in the pool. I backflushed, cleaned the grids, put in DE, and noticed the pressure didnt really go up while adding the DE. Also noticed a little bit of DE in the pool again the next time the filter came on. I was also seeing it in my S200. I took the filter...
  2. IMG_1620.jpg

    IMG_1620.jpg

  3. IMG_1619.jpg

    IMG_1619.jpg

  4. F

    Amerlite light fixture repair questions

    wow, lot of feedback after I ready patched the cable and put the light back in the pool. lol Re: replacing the light, thats what I originally going to do, but I'd thought I'd try the patch first. Its still on my list of things to do, but I dont feel like going into the pool to completely...
  5. F

    Amerlite light fixture repair questions

    Just an update, I sprayed the crack in the hose and connection with Gardner Bender's Spray Liquid Tape. I applied it maybe 5 times over 3 days. It seemed like the dried coat was thin so I just did coat after coat to make sure, since I was in no rush. Last application I used the regular brush...
  6. F

    Amerlite light fixture repair questions

    A few weeks ago I went to turn on the pool like and the gfci tripped. Today I finally got around to pulling the light and saw water in it. After I dried it out with a heat gun and left it in the sun all afternoon, tested it and it tripped again. Tested the junction and there was something up...
  7. IMG_1600.jpg

    IMG_1600.jpg

  8. F

    How bad is the condition of this pool surface

    They said that was included in the price. They offered to maintain it after for like $150/month, but I'll do it myself.
  9. F

    How bad is the condition of this pool surface

    Just an update if anyone is interested, I did do a full replaster, and replaced the tile. It was supposed to take a week, but it took 5! Funny, but when they finally got to the replastering part it only took two hours. And the initial chipout was done in a day. Half the delay was probably...
  10. IMG_1560_resized.jpg

    IMG_1560_resized.jpg

  11. IMG_1559_resized.jpg

    IMG_1559_resized.jpg

  12. IMG_1558_resized.jpg

    IMG_1558_resized.jpg

  13. IMG_1557_resized.jpg

    IMG_1557_resized.jpg

  14. F

    How bad is the condition of this pool surface

    Just an FYI, I did an acid wash and it kinda worked. It removed maybe 90% of the actual stains on the first attempt, but then I could see that a big part of what was bothering me wasn't staining but maybe missing plaster, and the gradation from different thicknesses of plaster. Since its...
  15. F

    Looking for a simple reliable LED bulb

    You know what, I think I will do that. I still dont know if it even works with the new bulb. I can always change it out later if I find I use the light more that I thought I would.