still need lights for my pool that will work with Aqualink automation

[robl45]

Any ideas? 2 in the pool and 1 in the spa (All) need to be replaced now. Hoping for something cost effective that will work with the controller.

 

[ajw22]

Do you have iAqualink? You need to figure out what model light support you have other then Jandy.

Aqualink supports the following color changing LED lights:

• Jandy WaterColors
• JandyColors
• Pentair IntelliBrite
• Pentair SAm/SAL
• Hayward Universal

Actual support once installed may vary, however.

If you have this you can control the lights listed in your system...

 

[robl45]

I'm looking more for generic options, not the 1000 dollar per light option if possible. Plus, the longetivity of the jandy is not good, I replaced the spa light insides and its garbage again and we only been here 10 years and I replaced it probably 2 plus years in or more.

 

[ajw22]

Your lights 120V or 12V through a transformer?

Florida Sunseeker PoolTone® Color LED Pool & Spa Lights and Bulbs

Pooltone Pool Baron best color led spa light bulbs lights Hayward Astrolite ColorLogic logic Pentair Amerlite Intellibrite Aqualumin Sta-Rite Swimquip Jandy Zodiac 619818Z 601000 601001 601002 601003 601010 601011 601012 601013 640120 640121 640123 640130 640131 640132 640133 SP0527 LPLUS bulb...

www.florida-sunseeker.com

 

[robl45]

12v. I seen those but no one can confirm they work

 

[ajw22]

12v. I seen those but no one can confirm they work

Florida Sunseeker is a reputable vendor.

Call and talk with them. They answer their phone.

 

[robl45]

Emailed previously and they were basically like we don’t know if it will work

 

[ajw22]

Emailed previously and they were basically like we don’t know if it will work

What did you ask them?

If what will work?

 

[robl45]

If it will work with direct access to the colors

 

[ajw22]

If it will work with direct access to the colors

They don’t know, and I don’t know, what lights your system supports. That is what I asked in post #2.

 

[robl45]

Says jandy colors. Jandy led. Color logic. And Sal Sam light

 

[ajw22]

Says jandy colors. Jandy led. Color logic. And Sal Sam light

So lights with that automation support will work with your Aqualink.

Basically Jandy or Hayward ColorLogic compatible lights.

 

[robl45]

You know of any? I haven’t been able to find

 

[ajw22]

You know of any? I haven’t been able to find

You say you want generic lights but with proprietary Jandy or Hayward controls.

I don’t know what will be acceptable to your budget. Shop around. I still think Florida Sunseekers may be one of your best choices.

 

[ajw22]

See if these lights will work for you…

Spa Electrics R10 R10H light Colorlogic Replacement

UPDATE: I just called Spa Electrics and they have just released a special version (R10H) that is designed as a DIRECT replacement for the colorlogic WHEN used in the shallow niche (LFGUY1000). Further, they can update the color sequence to be controlled by Omnilogic controls if you desire. I...

www.troublefreepool.com