Last edited by a moderator:
The way that's torn, it almost looks like it was some kind of masonry product (like hardy plank or something similar to that), which would probably muffle pump noise better than just wood.Need to replace the panels - see pic. The old one (previous homeowner) is rather heavy and may also absorb sound / pump noise. Not sure where I can get these or just install plywood panels from Home Depot or something? Any ideas would be greatly appreciated. Thanks!
No doubt nice and waterlogged.The old one (previous homeowner) is rather heavy and may also absorb sound / pump noise
HD/Lowes/etc had the exact same lattice panels for $30 each.Not sure where I can get these or just install plywood panels from Home Depot or something?
Thanks and a great advice. I was hoping to keep the lattice panels and place some kind of "panel" over the lattice panel. The current set up is "ok" just the pump noise is louder (for the neighborNo doubt nice and waterlogged.
HD/Lowes/etc had the exact same lattice panels for $30 each.
![]()
4 ft. x 8 ft. Pressure Treated Pine Wood Garden Lattice Panel 127738 - The Home Depot
Visit The Home Depot to buy Full 1/2 in. x 4 ft. x 8 ft. Pressure Treated Lattice 127738www.homedepot.com
It's probably a good idea to start with new 4x4s and top rails too.
Keep us posted.
*edit. I now see the busted panels, I thought it was just lattice. No idea what they are. Hang tight for thoughts.![]()
Make it prettyThe way that's torn, it almost looks like it was some kind of masonry product (like hardy plank or something similar to that), which would probably muffle pump noise better than just wood.
Some composite or vinyl fence panels might serve the same purpose, and would be lighter. Might also absorb sound a little better than wood, too?
Interesting topic to me- I ripped out a bunch of shrubs around my equipment and AC units and am pondering how to block the view with something architectural, too.
Something better than a blue tarp, for sure! LOLMake it pretty![]()