IntelliCenter 2.006 Firmware Update

Jump to latest Follow Reply
DB-Cooper

DB-Cooper

Well-known member
Jun 18, 2019
594
Austin, TX
Pool Size
30000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-60
Just noticed Pentair said there's a new FW for IntelliCenter. There's no longer a USB update function, and despite what it says, from 1.064 mine shows, "No Update Available". It says if there is no update to contact tech support.

www.pentair.com

IntelliCenter® Control System Firmware Download

Stay up to date with the newest software. Download the latest versions of our software here.
www.pentair.com www.pentair.com

My guess is this is just so new it hasn't hit their update servers. What is everyone else seeing?
 
I see no update notification on my Intellicenter2 app on my iPhone. When I walked outside to the panel, the panel indicated “running the latest already.”

Maybe I’ll reboot the panel and when it reconnects something will change. I highly doubt it though.
 
an1vrsy said:
I see no update notification on my Intellicenter2 app on my iPhone. When I walked outside to the panel, the panel indicated “running the latest already.”

Maybe I’ll reboot the panel and when it reconnects something will change. I highly doubt it though.
Click to expand...
Same here. I believe I was the first on this forum to post about 1.064 and I couldn't get the OTA update either, but I could/did do USB. Hours later, other forum members said they saw the OTA update. So perhaps waiting a little longer.
 
guinness said:
That's a bit shortsighted from Pentair. OTA updates are fine, but I bet there are panels in locations that don't have internet access.
Click to expand...
I presume that's what the "Contact Tech Support" option ultimately yields. Maybe they're not comfortable posting their firmware files as they're not hardened, or the risk of messup is too high. Who knows? Overwhelming majority of pool owners aren't tech savvy enough to handle that, so it's likely pool maintenance/service companies that would be doing any updates.
 
Just got home and checked mine. Also says running latest w/ 1.064.

So must not be ready yet. Someone probably pushed that to the website early.

--Jeff
 

Enjoying this content?

Support TFP with a donation.

Give Support
Has anyone updated to 2.006 yet? I updated mine yesterday. Only thing I noticed is now the spillway functionality doesn't work anymore. I tried removing and reinstalling the feature to no avail. Emailed support about it now. Anyone else have any experiences with the new firmware yet?
 
Yes, I did. I don't run my spillway through the programming like that. I can try and test it to see if it is doing the same thing though.

Here is another thread where folks have updated. IntelliCenter 2.006 Firmware

One of the posters in there said his spillover was wonky. Said they made it to where you had to have the pool circuit turned on as well as the spillway feature. Post #19.

--Jeff
 
Chaser918 said:
Has anyone updated to 2.006 yet? I updated mine yesterday. Only thing I noticed is now the spillway functionality doesn't work anymore. I tried removing and reinstalling the feature to no avail. Emailed support about it now. Anyone else have any experiences with the new firmware yet?
Click to expand...
I upgraded, my spillway is working. However, my friend updated and he said the same thing. He then said Spillway now ONLY runs if "Pool" mode is also on. If you just turn Spillway on without the Master Pool mode, it just runs pool pumps. Try turning "Pool" to on then activate spillway. In that config, mine works, and he confirmed it does for him. Good luck.
 
Turbo1Ton said:
Yes, I did. I don't run my spillway through the programming like that. I can try and test it to see if it is doing the same thing though.

Here is another thread where folks have updated. IntelliCenter 2.006 Firmware

One of the posters in there said his spillover was wonky. Said they made it to where you had to have the pool circuit turned on as well as the spillway feature. Post #19.

--Jeff
Click to expand...
Just saw your final comment, yeah poster 19 is the friend I referenced in my previous post.
 
  • Like
Reactions: Turbo1Ton
Yep, they sure did. Too many issues with that release.
Please see this post for further info.

IntelliCenter 2.006 Firmware

Also a release that only seems to have bug fixes should not use a major release functional enhancement increment. This should have been given a minor release increment within 1.x . @TonyR68 Yes, but Firmware v2.006 had more incorporated in that release than just bug fixes. What they call "Key...
www.troublefreepool.com www.troublefreepool.com
r.
 

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply