Hello -
I have a mystery. I have a intellicenter running two separate systems for pool and spa. When temp drops, both say that they are on freeze protection and the green light is on for both pumps on the app, but the spa pump flow is 0. I went and checked this morning, and the pump is not on. I am worried that my pool builder somehow set my pump speed to 0 for freeze protection last year because we had some issues before we separated the systems and freeze protection was causing my spa to drain into the pool with the shared system. Now that they are separate, I want to make sure that the spa pump is actually moving the water during freeze protection mode. Does anyone know how to adjust the pump speed while in freeze protection mode? I have looked everywhere in the app settings and configuration and can't find anything that helps me adjust settings for freeze protection. I emailed pentair support, but I wanted to also check here. Thanks in advance for any help you can offer!
I have a mystery. I have a intellicenter running two separate systems for pool and spa. When temp drops, both say that they are on freeze protection and the green light is on for both pumps on the app, but the spa pump flow is 0. I went and checked this morning, and the pump is not on. I am worried that my pool builder somehow set my pump speed to 0 for freeze protection last year because we had some issues before we separated the systems and freeze protection was causing my spa to drain into the pool with the shared system. Now that they are separate, I want to make sure that the spa pump is actually moving the water during freeze protection mode. Does anyone know how to adjust the pump speed while in freeze protection mode? I have looked everywhere in the app settings and configuration and can't find anything that helps me adjust settings for freeze protection. I emailed pentair support, but I wanted to also check here. Thanks in advance for any help you can offer!