Hi - Hoping for some help. This is a great forum and learned a lot already. My Pentair Intellichlor IC20 had the red flow light on despite there being plenty of flow after the pool was opened and everything cleaned up. Using this forum, I replaced the flow switch which set the flow light back to green but now the inspect cell light is flashing green and the salt indicator lights are not on at all.
When I first start the unit, I am not getting the "railroad crossing" lights and the low salt red light is on. After 10 mins or so that light goes off the the inspect cell light goes from green to flashing green. The cell life indicator still shows only 40% of cell life used.
I have exhausted all threads and the soonest a tech can come out is over a month. Any help would be appreciated.
Mike
When I first start the unit, I am not getting the "railroad crossing" lights and the low salt red light is on. After 10 mins or so that light goes off the the inspect cell light goes from green to flashing green. The cell life indicator still shows only 40% of cell life used.
I have exhausted all threads and the soonest a tech can come out is over a month. Any help would be appreciated.
Mike