Pump Plumbing Broke
- Thread starter garywi
- Start date
- Jun 1, 2018
- 16,094
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Its just a union but that exact one looks to be discontinued.
I imagine replacing the whole thing with any regular one would do. We’ll see what others have to say about it.
Is it leaking?
www.inyopools.com
I imagine replacing the whole thing with any regular one would do. We’ll see what others have to say about it.
Is it leaking?
2" Union Kit (1 Union Conn.1 O-ring,1 Nut) (spx4000unpak1) (Discontinued Without Replacement) - INYOPools.com
SPX4000UNPAK1 - 2" UNION KIT (1 UNION CONN.1 O-RING,1 NUT) (SPX4000UNPAK1)
www.inyopools.com
Thank you. It does drip a bit.Its just a union but that exact one looks to be discontinued.
I imagine replacing the whole thing with any regular one would do. We’ll see what others have to say about it.
Is it leaking?
2" Union Kit (1 Union Conn.1 O-ring,1 Nut) (spx4000unpak1) (Discontinued Without Replacement) - INYOPools.com
SPX4000UNPAK1 - 2" UNION KIT (1 UNION CONN.1 O-RING,1 NUT) (SPX4000UNPAK1)
There are no threads to screw into.
There is only one union that will work.
If you can't get the correct union, there is not much you can do.
There is only one union that will work.
If you can't get the correct union, there is not much you can do.
Probably time to switch to a variable speed pump.
I would not run the pump like it is as it might blow out at any time.
I would not run the pump like it is as it might blow out at any time.
Thank you. Every time I look into variable speed it gets complicated and I just forget it. My cost of electricity at night in Arizona is pennies and I also have floor pop ups.
Maybe send the part out for copying at a 3d print shop.
Last edited:
If you can glue a coupling over the black part with a big disc in place, that might hold everything together, but it would be permanent.
Maybe a 2.5" deep coupling would work?
Maybe a 2.5" deep coupling would work?
Last edited:
I would try to find a saddle clamp. Something that you can tighten (not excessively) around that the pipe that sits against the top of the union. You want to distribute the stress on those other 3 tabs. Not ideal, and it may only be temporary but would provide some safety.
- Jun 1, 2018
- 16,094
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Maybe something like this 
?
3 Inch V Band Clamp CNC Stainless Steel Flanges, 3in SS Vband, V-Band Flange Kit https://www.amazon.com/dp/B08D77DL42/ref=cm_sw_r_cp_api_glt_fabc_BXFRQ4ZZVCFP0DDHJQHF
Or even a large hose clamp?
Also call around to local pool places - they may still have one even though they are discontinued
?3 Inch V Band Clamp CNC Stainless Steel Flanges, 3in SS Vband, V-Band Flange Kit https://www.amazon.com/dp/B08D77DL42/ref=cm_sw_r_cp_api_glt_fabc_BXFRQ4ZZVCFP0DDHJQHF
Or even a large hose clamp?
Also call around to local pool places - they may still have one even though they are discontinued
thanks for finding this example. I searched HD and Lowes and all they had was regular lightweight clamps This is much better and agree, a pool store or a plumbing supply store may have similar products.Maybe something like this
3 Inch V Band Clamp CNC Stainless Steel Flanges, 3in SS Vband, V-Band Flange Kit https://www.amazon.com/dp/B08D77DL42/ref=cm_sw_r_cp_api_glt_fabc_BXFRQ4ZZVCFP0DDHJQHF
Or even a large hose clamp?
Also call around to local pool places - they may still have one even though they are discontinued
Maybe you could create a tube around the entire part and then fill the tube with a strong pourable epoxy.
Maybe cut a piece of 3" or 4" PVC in half lengthwise and secure around the entire section with tape and then epoxy putty at the bottom to prevent leakage of the liquid epoxy.
Fill the tube with epoxy to lock everything in place.
Maybe cut a piece of 3" or 4" PVC in half lengthwise and secure around the entire section with tape and then epoxy putty at the bottom to prevent leakage of the liquid epoxy.
Fill the tube with epoxy to lock everything in place.
sktn77a
Gold Supporter
I know exactly what you mean! You should still be able to get a single speed pump in Arizona, if not a two speed pump with a built in speed change switch.
After talking with several local pool companies, I am going with Pentair Intelliflow 2 HP Variable speed pump $1562.00 installed and the Pentair Intellicom for $450.00 which will integrate with my Jandy automation without changing it out. Hope I am making the right decision.
Why not get a Jandy 2.7 hp variable speed pump?
It's a bad idea to use a different manufacturer for the VS pump and the automation.
It's a bad idea to use a different manufacturer for the VS pump and the automation.
Jandy Aqualink RS - Further Reading
www.troublefreepool.com
2008 – Rev O = Communication with Variable Speed pumps.
What is the software revision?
When was the system installed?
You can do an upgrade if you need to.
www.jandy.com
AquaLink Upgrade & Conversion Kit | Jandy
Looking for an AquaLink RS Upgrade Kit? Find the AquaLink Conversion Kit for the Perfect Pool Experience. Buy Now w/ a Pool Pro Near You!
www.jandy.com
James.Jandy Aqualink RS - Further Reading
2008 – Rev O = Communication with Variable Speed pumps.
What is the software revision?
When was the system installed?
The OP started a new thread regarding the IntelliFlo working with Jandy Automation
See below
Thinking about Pentair Intelliflow 3hp model 011056
Hey Guys, looking to replace my 15 year old Hayward Northstar SP4015NS 1.5hp pump. Will the Intellflow work with my Jandy AquaLink RS automation. Is there anything else I should think about. Thank you
www.troublefreepool.com
Similar threads
