- Jun 28, 2021
- 12
- Pool Size
- 14000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Been having problems with the breaker tripping randomly over the last year or so. Replaced the capacitor a year ago on the booster. The breaker continues trip randomly but not consistent enough to pinpoint. Replaced the breaker for the one that seemed to trip the most. Had an electrician come out and verified everything was grounded properly and all electrical components were running as expected voltage wise but he couldn't duplicate while there so left it alone. Problem continued very randomly sometimes at startup or during a programmed cycle.
We have two on/off toggle light switches located at the pool equipment that turn the power on/off to the system.
Winter storm took out a lot of equipment and recently replaced and added new pieces (indicated below). Now that everything in place the installer connected everything and powered up the new panel but the breakers tripped immediately and will not stay on if the new panel is turned on. troubleshot for a while indicated he would have to research and got the main pump running directly while he researched.
Of the two switches the left on/off switches (noted above) the left is on and seems to power the main pump with no issues.
My deliemma and ask is if all the equipment has now effectively been replaced in the last two years and critical pieces replaced this week what could be or is causing the same continued issues? The only component that has an accessible capacitor is the booster which I have changed once and will be changing again on Tuesday.
House main breakers:
Dual - 30 Amp (pool / pump)
Dual - 20amp (pool / booster)
Dual - 20 Amp (jacuzzi / pool GFI)
Pool equipment:
Pentair Intelliflo VSF - new (previously Intelliflo VS+SVRS)
Pentair Booster LA01N - 2 years old
Jandy FloPro 1hp - new 2020
Pentair Mastertemp 400 - new 2020
Pentair CCP520 - new
Pentair intellichlor Salt CG IC40 - new
Peantiar Easytouch 8PSC - new
Spa air bell with spa side push button 10yrs old
Lights (1- pool / 1- spa) replaced light bulbs with LED in 2020
Pentair Screenlogic2 - new
Images of pool equipment and breaker inserted
We have two on/off toggle light switches located at the pool equipment that turn the power on/off to the system.
Winter storm took out a lot of equipment and recently replaced and added new pieces (indicated below). Now that everything in place the installer connected everything and powered up the new panel but the breakers tripped immediately and will not stay on if the new panel is turned on. troubleshot for a while indicated he would have to research and got the main pump running directly while he researched.
Of the two switches the left on/off switches (noted above) the left is on and seems to power the main pump with no issues.
My deliemma and ask is if all the equipment has now effectively been replaced in the last two years and critical pieces replaced this week what could be or is causing the same continued issues? The only component that has an accessible capacitor is the booster which I have changed once and will be changing again on Tuesday.
House main breakers:
Dual - 30 Amp (pool / pump)
Dual - 20amp (pool / booster)
Dual - 20 Amp (jacuzzi / pool GFI)
Pool equipment:
Pentair Intelliflo VSF - new (previously Intelliflo VS+SVRS)
Pentair Booster LA01N - 2 years old
Jandy FloPro 1hp - new 2020
Pentair Mastertemp 400 - new 2020
Pentair CCP520 - new
Pentair intellichlor Salt CG IC40 - new
Peantiar Easytouch 8PSC - new
Spa air bell with spa side push button 10yrs old
Lights (1- pool / 1- spa) replaced light bulbs with LED in 2020
Pentair Screenlogic2 - new
Images of pool equipment and breaker inserted