Can anyone recommend Circupool salt water systems. I plan to install an RJ 60 myself. The warranty is 8 years and covers do it yourself. I had planned to go with Pentair but their warranty doesn't fully cover do it yourself. 1400.00 for complete system.
Circupool
- Thread starter myname
- Start date
- May 3, 2014
- 58,646
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Many members have installed Circupool SWCG's. There have been one or two issues, but overall good reports and good customer service.
I suggest you read ABC's of Pool Water Chemistry.
Many members have installed Circupool SWCG's. There have been one or two issues, but overall good reports and good customer service.
I suggest you read ABC's of Pool Water Chemistry.
- Jun 22, 2014
- 47,923
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome! 
I installed the RJ-45+ last year. Very pleased. My install link is below.
www.troublefreepool.com
I installed the RJ-45+ last year. Very pleased. My install link is below.Circupool RJ-45 Plus Install
This weekend I finally installed my RJ-45. I've been stalling on this for a long time, but the 2020 COVID-19 pandemic and resulting chlorine shortage finally pushed me over the edge. Plus, it was simply time. The Circupool Installation and Operation Guide is quite good, but here are some...
www.troublefreepool.com
Thanks for the reply. I'll install my Circupool in a week or so. I'm mostly sold on the warranty side of installing one. Hope for no issues. I'll let you all know how it ended.
Are you buying from discount salt? Others sell then but they seem to have to best pricing and are connected to circupool
In a few weeks our RJ+45 will be going on its third year. No issues here so far.
Get the Taylor 1766 if you haven't already and add salt over a week if possible. Sometimes the levels don't show up for 24 hours.
I also noticed the salt test works better when the water is warmer. I took samples inside and let them get up to room temp and tested. When the water was cold the solutions didn't seem to mix as well.