Issue
IntelliChlor IC-40 is working properly, but ScreenLogic 2 is reporting “Chlorinator: Communication Lost.”
Equipment:
All Pentair, except Polaris 280 + Booster
IC-40
FNS Plus 60 sq ft DE filter
Master Temp 400K
i9+3 automation system
IntelliFlo variable Flow pump
Approx 15K gallons
Troubleshooting/Observations:
Please help me with some ideas. Thanks!
IntelliChlor IC-40 is working properly, but ScreenLogic 2 is reporting “Chlorinator: Communication Lost.”
Equipment:
All Pentair, except Polaris 280 + Booster
IC-40
FNS Plus 60 sq ft DE filter
Master Temp 400K
i9+3 automation system
IntelliFlo variable Flow pump
Approx 15K gallons
Troubleshooting/Observations:
- Power off/restart i9 twice.
- Removed IC-40 cable from Load Center, and reinstalled. Cleaned cable pin contacts with wire brush and lubed.
- Cleaned Cell. Wasn’t very dirty, but I acid-cleaned it anyway.
- All lights on IC-40 appear normal. Good salt level, flow rate, two status lights indicating it’s operating at between 21-40% (I had set at 35% on Screenlogic).
- Observed bubbles at closest pool return, which indicate it is chlorinating.
Please help me with some ideas. Thanks!