- Apr 23, 2009
- 103
- Pool Size
- 8800
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-30
I've been reluctant moving to a SWG, but for convenience, I made the move.
I have an 8800 gallon 2 and a half year old plaster pool and spa that I've been using liquid chlorine except for when I'm away.
Because all my equipment is Pentair, I chose the Pentair iChlor 30 purchased and installed by Pinch A Penny (installed yesterday).
This mornings test results:
FC: 8 (down from yestersay)
CC: 0
pH: 7.8
TA: 65
CH: 340
CYA: 60
Salt: 4400
BOR: 50
Temp: 86
CSI: -0.24
iChlor set at 22%, filter on 9 hr/day
As the system settles in and adjustments become necessary, is it better to adjust the SWG % or the run time? Should the SWG be adjusted up to a certain % then adjust run time?
I have an 8800 gallon 2 and a half year old plaster pool and spa that I've been using liquid chlorine except for when I'm away.
Because all my equipment is Pentair, I chose the Pentair iChlor 30 purchased and installed by Pinch A Penny (installed yesterday).
This mornings test results:
FC: 8 (down from yestersay)
CC: 0
pH: 7.8
TA: 65
CH: 340
CYA: 60
Salt: 4400
BOR: 50
Temp: 86
CSI: -0.24
iChlor set at 22%, filter on 9 hr/day
As the system settles in and adjustments become necessary, is it better to adjust the SWG % or the run time? Should the SWG be adjusted up to a certain % then adjust run time?