Ok. We just setup our 18x48 above ground pool we purchased at Wally world. I'm running the filter that came with it. We also purchased a salt water generator at Wally world. The only level I can get right is the salt lol. Using clorox test strips I've been checking my water and adding everything it's telling me to. (Ph up, shock, stabilizer (used sock method for cya), metal stain control...) i run the swg on boost for 4 hours then another 10 hours on the regular cycle. my reading are
Hardness- 500
Tc- 0
Fc- 0
Ph- 7.8
Alkalinity- 240
Stabilizer- 0 (I used a sock in front of the return with .5lb)
I'm at a complete loss on where I am screwing this up. Please help! Thank you!!
Hardness- 500
Tc- 0
Fc- 0
Ph- 7.8
Alkalinity- 240
Stabilizer- 0 (I used a sock in front of the return with .5lb)
I'm at a complete loss on where I am screwing this up. Please help! Thank you!!